Address:No. 23 Dongsi Road, East development Zone, Linqu,Weifang City,Shandong Province,China | |
Tel: +86-536-8309116 +86-532-86688809 |
|
Fax: +86-0536-8309116 | |
Email: rechal@baitecidian.com |
Introduction:
Vibrating Feeder is a kind of linear direction feeding equipment. It features smooth vibrating, reliable operation, long service life and being suitable for feeding.
Vibrating feeders are widely used in mining, building-material, silicate and chemical industry in the crushing and screening plants.In the Sand-Stone production
line, vibrating feeder can send materials to crusher evenly and continuously and at the same time, it can screen materials roughly.Vibrating feeder can be used in
these areas such as metallurgical industry, coal mining industry, mining-selecting, building, chemical and grinding industry, etc.
Vibrating feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whose gears
are jogged. When installation, the two gears must be jogged according to the sign. Through drive of the motor, the two eccentric shafts start rotating to produce
a linear huge power which forces the feeder to vibrate. Through the vibration,the materials will slip and sling on the funnel, moving forward, when the materials
pass the screening part, smaller parts will fall down, and avoiding the further crushing, so screening purpose can be reached.
Feature:
--Simple structure, easy maintenance, lower initial investment.
--.Matched with the electromagnetic speed-adjustable motor, the feeding speed can be adjusted according to customers’ requirements.
--This type of feeder is equipped with double-layer base plate and becomes more durable and sturdy.
--The motor is installed under the base plate to save space.
--Different from the front support in the market, we adopt the technical improvement and the equipment structure is more compact. It makes the feeding operation
more smooth and stable.
-- Instead of using cast iron before, we now use cast steel as raw material of the bearing seat. And compare to the two fixed bolts before, the base of the feeder now
is fixed by four bolts. All these improvements make this type of feeder become more sturdy and durable.
Technical Parameter
NO. | Model | Feeding size (mm) | Capacity (t/h) | Spindle speed (r/min) | Groove face inclination | Driving Power(kw) | Appearance size (mm) |
1 | CZG0828 | ≤500 | 20-70 | 240-600 | 12° | 7.5 | 2740×950×1334 |
2 | CZG1030 | ≤600 | 30-100 | 11 | 2920×1227×1400 | ||
3 | CZG1230 | ≤700 | 40-130 | 15 | 2960×1360×1400 | ||
4 | CZG1436 | ≤700 | 50-180 | 22 | 3504×1620×1492 | ||
5 | CZG1545 | ≤700 | 70-250 | 30 | 4400×1730×1540 |