
![]() |
Address:No. 23 Dongsi Road, East development Zone, Linqu,Weifang City,Shandong Province,China |
![]() |
Tel: +86-536-8309116 +86-532-86688809 |
![]() |
Fax: +86-0536-8309116 |
![]() |
Email: rechal@baitecidian.com |
Introduction:
It mainly used for selection of magnetite as well as concentrating operation. The machine need no power, with simple structure and good desliming effect.
BCT magnetic desliming machine includes external barrel with tapered bottom and internal barrel fixed to inner cavity of external barrel. The inwall of
external barrel has multiple-story magnet stand. There is magnet on the stand, outlet port of the feed is on the low end of the tapered bottom of external barrel and has the plug. The plug
is connected to the leading screw passing internal barrel. There is a water inlet on the tapered bottom of external barrel and overflow box is on the top of the
external barrel. There is a water outlet on the bottom of the overflow box, the pulp distribution groove is on the top of the internal barrel, and there is a pulp
distribution mouth on the bottom of pulp distribution groove.
The device can separate gangue and lean ore intergrowth from the concentrate, with its effective separation granularity scope below 60, mainly used for
selection of magnetite as well as concentrating operation. The machine can obtain qualified concentrate when granularity scope is relax, and can improve 1-5 percentage point of iron powder grade. It is used after magnetic separator, conducting desliming of iron powder separated by the magnetic separator. The
machine need no power, with simple structure and good desliming effect.
Feature:
-- Good adaptability and wide applications.
-- The wholly sealed structure makes the machine dust-proof and corrosion resisting.
-- No energy consumption.
-- Easy to install and convenient to use.
-- High efficiency and stable performance.
-- High processing capacity and a long service life
overal Dimension Drawing
Technical Parameter
NO. | Model | Diameter of drum(mm) | Diameter of discharge opening(mm) | Processing capacity(t/h) | Weigh (kg) |
1 | CS-10 | 1000 | 300 | 15-30 | 1050 |
2 | CS-15 | 1500 | 350 | 20-45 | 1400 |
3 | CS-20 | 2000 | 370 | 25-55 | 1850 |
4 | CS-25 | 2500 | 400 | 30-65 | 2300 |
5 | CS-30 | 3000 | 450 | 35-75 | 2860 |
6 | CS-35 | 3500 | 500 | 40-85 | 3470 |