
![]() |
Address:No. 23 Dongsi Road, East development Zone, Linqu,Weifang City,Shandong Province,China |
![]() |
Tel: +86-536-8309116 +86-532-86688809 |
![]() |
Fax: +86-0536-8309116 |
![]() |
Email: rechal@baitecidian.com |
Introduction:
Vibrating Feeder adopts the vibrating motor to produce vibration force. It is used to feed materials into primary crusher evenly, and meanwhile because of
the grit-shaped screen, it can screen away soil contained in the raw material, and increase the capacity of primary crushing. It is suitable to feed material
into primary crusher in hydroelectric field, building material and mining industry.
Feature:
-- Vibrating feeder enjoys simple structure, stable vibrating, even feeding, good continuous performance, adjustable excitation force, etc. Its flow rate can
be conveniently changed and controlled.
-- It adopts eccentric block as the excitation source and features low noise, low energy consumption, good adjusting performance, and no material splashing.
-- Closed type vibrating feeder can prevent the pollution of dust.
-- The pressure caused by the material to the groove should be reduced to the greatest extend.
The effective discharge opening should be smaller than the one quarter of the groove width.
The flow rate should be controlled within 6-18m/min.
-- For feeding materials with a large quantity, a fender with enough height should be installed at the outlet. This fender should not be fixed to the feeder since
it will affect the performance of the machine.6. For smooth charging, the best discharging angle is 55°-65°.
Working Principle Drawing
Technical Parameter
NO. | Mode | Feeding Size (mm) | Capacity (t/h) | Groove face inclination | Motor Power(kw) | Appearance size (mm) |
1 | ZSW380-96 | ≤500 | 70-140 | 0° | 11 | 3882×1467×1325 |
2 | ZSW490-110 | ≤600 | 120-250 | 15 | 4980×1654×1345 | |
3 | ZSW490-120 | ≤700 | 150-300 | 18.5 | 4980×1754×1345 | |
4 | ZSW590-120 | ≤700 | 180-350 | 22 | 6058×1925×1563 | |
5 | ZSW590-130 | ≤750 | 250-450 | 30 | 6058×2025×1563 | |
6 | ZSW590-150 | ≤900 | 300-550 | 37 | 6058×2225×1563 |
You may like:
RCDA AIR-COOLING ELECTROMAGNETIC SEPARATOR
RCYA-SERIES-PIPE-PERMANENT-MAGNETICSEPARATOR
RCYP SERIES SCRAPING PLATE TYPE PERMANENT MAGNETIC
SERIES RCYF PIPELINE TYPE PERMANENT MAGNETIC SEPARATOR
RCYB High Power Iron Permanent Suspension Magnetic Separator For frica With Mining Equipment