
![]() |
Address:No. 23 Dongsi Road, East development Zone, Linqu,Weifang City,Shandong Province,China |
![]() |
Tel: +86-536-8309116 +86-532-86688809 |
![]() |
Fax: +86-0536-8309116 |
![]() |
Email: rechal@baitecidian.com |
Introduction
large capacity centriuge machine is a relatively new type of gravity concentration apparatus. The machines utilize the principles of a centrifuge to enhance
the gravitational force experienced by feed particles to effect separation based on particle density. The key components of the unit are a cone shaped
"concentrate" bowl, rotated at high speed by an electric motor and a pressurized water jacket encompassing the bowl. Feed material,typically from a ball mill
discharge or cyclone underflow bleed, is fed as a slurry toward the center of the bowl from above.The feed slurry contacts the base plate of the vessel and
due to its rotation, is thrust outward.The outer extremities of the concentrate bowl house a series of ribs and between each pair of ribs is a groove. During
operation the lighter material flows upward over the grooves and heavy mineral particles (usually of economic value) become trapped within them. Pressurized
water is injected through a series of tangential water inlets along the perimeter of each groove to maintain a fluidized bed of particles in which heavy mineral
particles can be efficiently concentrated.
large capacity centriuge machine was patented in China. It is an efficient equipment for recovering free gold in all particle size ranges,specially for recovery
of fine gold which is lost during the operation of the gravitational concentrators(sluice boxes and jigs). It can be used not only for placer gold mining, but also
for hard rock mining to recover the natural gold, replacing amalgamation, and recover gold from the old tailings.
Application shows that the recovery can be as high as 99%, and the concentrating ratio is up to 1,000 times. In recovering the natural gold in lode ore with
size -0.074mm, the gold is up to 98%, For 0.004mm in particle size, the gold recovery is 97%.
Features
--99% High Recovery Rate
--Low Investment & High Income
--Low Maintenance , Labor Saving & Easy Operation
--Discharge directly & automatically
--Turbination Type Recoil Water Punching Holes, improve the water pressure and flush widely
--Frequency Changer adjust the rotation speed
--Water Filter avoid artificial remove
--Pressure Valve control the pressure
--Balance Test Before Shipment
--Internal Lining Board, increase the wear resistance
--Eleven-layer Inside Wall, improve the classification efficiency.
Technical Parameter
Model | STL 19 | STL 30 | STL 60 | STL 80 | STL 100 |
Capacity(T/h) | 0.2–1 | 2–8 | 10–40 | 35–70 | 75–120 |
Feed particles(mm) | 0–3 | 0–4 | 0–6 | 0–6 | 0–6 |
Feeding concentration(%) | 0–50% | 0–50% | 0–50% | 0–50% | 0–50% |
Recoil of water(T/h) | 1.5–2 | 4–5 | 10–15 | 17–25 | 40–60 |
Concentrate production (kg per time) | 2–3 | 10–20 | 30–40 | 60–70 | 70–80 |
Driving Power(kw) | 0.75 | 1.5 | 4 | 11 | 18.5 |
Cone rotational speed(r/min) | 800 | 600 | 460 | 400 | 600 |
Water Pressure(Mpa) | 0.04 | 0.12 | 0.25 | 0.35 | 0.4 |
Appearance size(mm) | 790×785×790 | 1180×1140×1250 | 1970×1670×1750 | 2300×1800×2200 | 2500×2000×2400 |
Weigh(kg) | 145 | 400 | 1300 | 1500 | 2000 |
You may like:
PROFESSIONAL DESIGN FU TYPE CHAIN SCRAPER CONVEYOR
DJ BELT CONVEYOR WITH BIG ANGLE FOR BULK MATERIAL HANDLING
LARGE NE PLATE CHAIN EFFICIENT BUCKET ELEVATOR
METAL DETECTOR FOR FOOD INDUSTRY